Cameras as of late are so customizable that generally it is onerous to even know the place to start out. So, after quite a lot of effort and time, right here is how I’ve my digicam set as much as {photograph} weddings.
Whereas probably the most helpful method to stroll by these settings is to observe the video, I do wish to broaden on a few of the settings I’ve set that I could not essentially dive deeper into as a part of the video.
Again-Button Focus
I discussed this within the video a bit, however I kind of skimmed over it as a result of this setting has at all times been one which I felt ought to be default for nearly all customers. However I do notice that not everybody is aware of why that is helpful. By default, all cameras have the main target tied to the shutter button the place you half-press the shutter to interact the main target. The issue is that each time you launch the shutter, you must refocus. There are additionally occasions if you need the main target to trace and different occasions if you need the main target to easily set and keep. Historically, there are quite a few settings that you must alter for the varied methods you need the main target to behave, like monitoring vs. non-tracking and steady focusing vs. single vs. focus lock. The place back-button is available in, it ties all these skills right into a single button with none kind of menu modifications.
So, the way in which this will get set is that you simply take away the main target acquisition from the shutter and easily tie the focus-on to the again button. For focus mode, I at all times have this set to steady and monitoring. Now, the way in which this works is each time I press and maintain the again button, it acts as steady focus and tracks the topic. After I wish to merely deal with a topic after which have that locked in, I press the again button after which launch the button. As a result of the main target is not tied to the shutter, I can shoot as I would like, and the main target will stay the place set till I press the again button once more.
Flash Timing
This is a crucial setting for me just because I take advantage of the Sony a9 III. And since I’m merely speaking about settings, I could not actually dive into what this setting does and why it’s essential. So under is a video that explains the way it works in relation to conventional sync and high-speed sync. However once more, if you do not have a Sony a9 III, then this setting shouldn’t be related for you.
Enhance Button and Pre-Seize
Each these settings have the flexibility to seize photos as quick as 120 frames per second. But it surely’s essential to comprehend that this body charge might be too excessive for almost all of individuals. If that’s the case, you’ll be able to completely choose a decrease body charge. However for the increase button, you’d clearly wish to ensure you choose a body charge that’s greater than you usually use. As for pre-capture, it is also essential to know that the scale of the digicam buffer has a set restrict. So in case you have pre-capture set to the complete one-second at 120 frames per second, it will eat up a very good quantity of your buffer, which suggests you will not have a lot capability to seize something after you press the shutter. So if you’d like the flexibility to proceed capturing after you press the shutter in addition to seize photos earlier than you press the shutter, mess around with the settings to search out your candy spot. In my use, being within the vary of 60 frames per second and a quarter-second offers me sufficient photos pre-capture in addition to nonetheless being able to take photos after. 
Customization Versus Usability
When watching the video, you’ll discover that I’ve a very good handful of buttons that haven’t any task in any respect. Whereas it might be very helpful to have features tied to those buttons, the usability of my digicam is extra essential than ease of use. Due to these buttons, with use, I’ve seen that I are likely to bump or unintentionally hit them. So utilizing these buttons to entry features can be helpful, but it surely truly hinders using my digicam and slows me down as a result of I find yourself capturing with the flawed settings as a result of I bumped it. Or, I’ve to continuously regulate these settings to verify they weren’t unintentionally hit. So when establishing your digicam, it is essential to remember what you suppose can be good when it comes to setup, but additionally how these settings truly translate to real-world use.
1, 2, 3 Dial and Customized Maintain Buttons
I really feel these are a few of the most underused customization instruments out there. Whereas I take advantage of mine for straightforward entry to leap between aperture precedence, guide, in addition to totally different focus modes, the choices listed below are fairly substantial. And I truly want there have been a number of extra choices out there inside these customizations, besides, there’s a lot that may be finished. So look by what choices can be found and maintain these in thoughts when you are working. From right here, anytime you end up going into the menu to make a change, ask your self if that is one thing that might be helpful to assign to a button or dial setting. On the finish of the day, with all of the customization choices, the aim is to by no means want to leap into the menu. 
Conclusion
There is no such thing as a one-size-fits-all for establishing your digicam. This setup is what I’ve discovered works properly for me by a ton of in-the-field use. However I’m not saying it will completely be just right for you and the way in which you’re employed. Hopefully, this at the very least offers you an concept of some choices in addition to shines some mild on choices that is probably not overly obvious when first diving into the menu. When you have any kind of specialty setting or customization that you simply discover helpful, I’d love to listen to about it within the feedback.
